T313 Partitioning of Chlorine and Associated Halogens between Minerals, Melts, and Brines

Wednesday, 28 September 2016
1:30 PM - 5:30 PM
Room 205

A COMPARISON BETWEEN THE STABILITY FIELD OF A CL-RICH SCAPOLITE AND THE END-MEMBER MARIALITE

Paper number: T313-7
Program: Technical Sessions
Time: 2:55 PM – 3:10 PM

Authors

Abstract

Scapolites are widespread rock-forming aluminosilicates, which appear in many metamorphic terrains and metasomatic environments. In this study the reaction

3(Na0.8Ca0.2)(Al1.2Si2.8)O8 + 0.8NaCl + 0.2CaCO3 = (Na3.2Ca0.8)(Al3.6Si8.4)O24(Cl0.8(CO3)0.2)

was investigated to determine the effect of the Ca-rich meionite component on the Na end-member marialite. This study was done in a piston-cylinder press and internally heated gas vessels. The conditions were 500-850°C and 0.4-2.0 GPa. The starting materials were the synthetic phases scapolite of the composition marialite80meionite20 (Ma80Me20), plagioclase of the composition albite80anorthite20 (Ab80An20), halite, and calcite. Thus far, intermediate composition scapolite shows a wide thermal stability and is stable at temperatures higher than 750°C at 0.4 GPa and 760°C at 2.0 GPa. Based on experimental brackets from Almeida & Jenkins (GSA, 2015) for the water-free system involving end-member marialite and end-member meionite from Newton and Goldsmith (ZK, 1976) one can see that the intermediate composition scapolite from this study is more stable (lower thermal stability) than either end-members.

The stability of intermediate scapolite in the presence of variable amounts of H2O was also investigated. It appears that solid solution scapolite is quite tolerant to water; it requires a minimum bulk salinity of the brine of approximately 0.2 XNaCl at 830°C and 680°C at pressures of 2.0 GPa and 1.5 GPa, respectively, in order for it to be stable. In comparison, pure marialite is very intolerant to water; it requires a minimum bulk salinity of the brine of about 0.8 XNaClat 1050°C and 1000°C at pressures of 2.0 GPa and 1.5 GPa, respectively, in order for it to be stable (GSA, 2015).

The intermediate scapolite investigated in this study indicates that a small change in the chemical composition from end-member marialite to Ma80Me20 lowers the stability field of marialite by 260°C at 2.0 GPa to 730°C by the high entropy of mixing in scapolite. This ability to be stable at much lower brine concentrations and temperatures indicates that scapolite is a mineral equivalent to mid- to high-grade metamorphic conditions (greenschist-amphibolite facies), and would be common in metasomatic environments, as it is widely reported in the literature.

Geological Society of America Abstracts with Programs. Vol. 48, No. 7

doi: 10.1130/abs/2016AM-279255

© Copyright 2016 The Geological Society of America (GSA), all rights reserved. Permission is hereby granted to the author(s) of this abstract to reproduce and distribute it freely, for noncommercial purposes. Permission is hereby granted to any individual scientist to download a single copy of this electronic file and reproduce up to 20 paper copies for noncommercial purposes advancing science and education, including classroom use, providing all reproductions include the complete content shown here, including the author information. All other forms of reproduction and/or transmittal are prohibited without written permission from GSA Copyright Permissions.