T23 Unconventional Energy Resources (Posters)

Sunday, 4 November 2018
9:00 AM - 5:30 PM
Halls J-K

ROCK MECHANICAL PROPERTIES VARIATION IN THE SEQUENCE STRATIGRAPHIC CONTEXT OF THE UPPER DEVONIAN NEW ALBANY SHALE, ILLINOIS BASIN

Paper number: T23-10
Program: Technical Sessions
Time: 9:00 AM – 5:30 PM

Authors

Abstract

Rock mechanical properties of unconventional shale reservoirs are one key parameter in shale oil/gas exploration and development. Understanding the stratigraphic distribution of rock mechanical properties in black shale successions is critical for identifying potential intervals for horizontal drilling. High-resolution hardness tests (6 cm spacing) using an Equotip Bambino 2 hardness tester and portable x-ray fluorescence (pXRF) analysis (8 cm spacing) were conducted on a New Albany Shale core to study the stratigraphic variation of rock mechanical properties and the control of rock composition on hardness of shales. Element concentrations obtained by pXRF analyzer were calibrated with 44 New Albany Shale samples.

The results show that the average SiO2 content in the New Albany Shale is 54.51%, out of which 5.51% is of biogenic origin. Biogenic silica occurs as recrystallized radiolarian, chemical precipitation in Tasmanites cysts, and microcrystalline quartz in the matrix. Hardness of shales is not controlled by total silica content, but by biogenic silica content because biogenic silica cement can form a continuous and stiff framework that hardens shales. Calcite cement also increases hardness in the presence of large amounts. Dispersed grains such as detrital quartz, feldspar, and dolomite do not contribute to hardness. The negative correlation between hardness and Al2O3 content suggests that clay minerals reduce hardness of shales. When examined under scanning electron microscope (SEM), soft shales are rich in clay minerals compared to biogenic-silica-rich hard shales. The influence of organic matter on hardness is offset by biogenic silica because organic matter and biogenic silica content have similar stratigraphic distribution patterns. Within the sequence stratigraphic context of the New Albany Shale, hardness increases in the transgressive systems tract (TST), reaches maximum at maximum flooding surface (MFS), and decreases in the highstand systems tract (HST). The stratigraphic distribution pattern of hardness is controlled by the distribution of biogenic silica. Therefore, the MFS interval has the highest potential for the development of natural fractures and is the optimal interval for horizontal drilling and hydraulic stimulation.

Geological Society of America Abstracts with Programs. Vol. 50, No. 6

doi: 10.1130/abs/2018AM-318079

© Copyright 2018 The Geological Society of America (GSA), all rights reserved. Permission is hereby granted to the author(s) of this abstract to reproduce and distribute it freely, for noncommercial purposes. Permission is hereby granted to any individual scientist to download a single copy of this electronic file and reproduce up to 20 paper copies for noncommercial purposes advancing science and education, including classroom use, providing all reproductions include the complete content shown here, including the author information. All other forms of reproduction and/or transmittal are prohibited without written permission from GSA Copyright Permissions.