T186 Sediment Residence Times and Thresholds for Sediment Transport in Fluvial Corridors (Posters)

Tuesday, 12 October 2021
2:30 PM - 6:30 PM
Exhibit Hall A

RIVER EROSION BY PLUCKING ILLUMINATED IN LAB AND FIELD STUDIES

Paper number: T186-1
Program: Technical Sessions
Time: 2:30 PM – 6:30 PM

Authors

Abstract

Plucking regulates the style and rate of erosion in many bedrock rivers, but the physical forces governing the hydraulic conditions that initiate plucking need further study. Wilkinson et al. (2018) proposed three potential mechanisms that explain how fractured bedrock can be plucked from a smooth surface in the presence of non-uniform or changing water surface topography. Building on former flume studies of plucking, we used a 2.44 m X 14.3 cm X 33 cm acrylic flume with 3D-printed plaster blocks with a 0.5-mm-aperture crack network to further investigate Wilkinson’s hypotheses and learn more about the role of hyporheic flow and associated pressure differentials during plucking in non-uniform flow. We created hydraulic jumps at an upstream step and controlled its position and geometry by changing the flume slope and the flume outlet using an adjustable gate. Dye injected under the simulated bedrock blocks illustrates the dynamics of pulsed, upstream flow in the hyporheic zone and pressure sensors record pressure below the blocks along the flume centerline. With these tools, we seek to illustrate pressure pulses and flow below the blocks in response to the dynamics of flow over the blocks and in the hydraulic jump. To correlate these lab data with field conditions, we continued the development of an instrumented block removed from fractured, bedrock bed below a step in the Cowpasture River, Virginia. A sensor capsule designed to measure motion and pressure during high-flow events. The capsule emplaced in a 4.5 cm hole drilled through the block consists of two pressure sensors and three-axis gyroscopes and accelerometers. The pressure sensors are placed at the top and bottom of the rock within the capsule to collect and record pressure data to identify neutral buoyancy. The gyroscopes and accelerometers measure angular and linear inertial data respectively to track vibrations and lift. The inertial and pressure data are synchronously measured and recorded to the SD card. Analysis of the recorded data lends itself to a more complete understanding of plucking through synthesizing experimental results from the lab and field.

Geological Society of America Abstracts with Programs. Vol. 53, No. 6

doi: 10.1130/abs/2021AM-370146

© Copyright 2021 The Geological Society of America (GSA), all rights reserved. Permission is hereby granted to the author(s) of this abstract to reproduce and distribute it freely, for noncommercial purposes. Permission is hereby granted to any individual scientist to download a single copy of this electronic file and reproduce up to 20 paper copies for noncommercial purposes advancing science and education, including classroom use, providing all reproductions include the complete content shown here, including the author information. All other forms of reproduction and/or transmittal are prohibited without written permission from GSA Copyright Permissions.