6 Hydrogeology and Water Resources II: Extreme Events and Coastal Hazards: Flooding, Contamination, and Land Subsidence (Posters)

Monday, 14 March 2022
3:30 PM - 5:30 PM
Online

EVALUATING THE EXTENT AND RATE OF HG SORPTION BY ENGINEERED SORBENTS DEPLOYED IN BANK SOILS AND SEDIMENTS OF A HG-CONTAMINATED CREEK

Paper number: 6-5
Program: Theme Sessions
Time: 3:30 PM – 5:30 PM

Authors

Abstract

Mercury (Hg) is a global pollutant and a threat to environmental and human health. Hg contamination in the East Fork Poplar Creek (EFPC) is one of the impacts of the cold war. Significant amounts of Hg were lost to soil and rock on the Oak Ridge Reservation, where EFPC originates resulting in widespread Hg contamination downstream. Sorbent amendments are considered to reduce the flux of Hg from banks soils and sediments into creek thereby reducing the bioavailability for the transformation of highly toxic methylmercury by microorganisms. In this study, three sorbent materials - activated carbon, biochar and Organoclay (organically modified phyllosilicate), and quartz sand as a negative control were placed inside nylon mesh bags to prevent loss and placed in creek sediments and bank soils in three creek sediment sites and two creek bank locations with different levels of Hg contamination. These sorbent coupons were deployed at the field sites for time periods of 1, 3, 6 and up to 12 months.

The amount of adsorbed total Hg varied highly between replicate samples at each location. This variability can be attributed to local heterogeneities and stratification of Hg concentrations in bank soils and creek sediments. However, the relative fraction of sorbed Hg is comparable for each sorbent deployed at different locations. The Hg sorption kinetics were fitted to a pseudo-first-order rate equation to obtain the adsorption rate kt and the adsorption density at equilibrium (Qmax). Across all field sites and conditions, we observed the highest Qmax in biochar (1,051 – 2,549 ng/g) followed by activated carbon (628 – 2,231 ng/g). The kt of biochar and activated carbon were comparable and ranged from 0.38 – 0.54 mo-­1 and 0.1 – 0.43 mo-1, respectively. Organoclay showed lower adsorption rates ranging from 0.03 – 0.20 mo-1. A larger variability in the adsorption rates was observed for quartz sand ranging from 0.03 – 1.3 mo-1, which is attributed to its low sorption capacity (150 – 600 ng/g). Interestingly, although background Hg concentrations varied over two orders of magnitude between field sites, they had little impact on the observed Qmax for all sorbents. Sorbent coupons deployed in bank soils showed lower Qmax values, which suggests that higher pore water contents enhance partitioning of Hg to the sorbent.

Geological Society of America Abstracts with Programs. Vol. 54, No. 1

doi: 10.1130/abs/2022SC-373374

© Copyright 2022 The Geological Society of America (GSA), all rights reserved. Permission is hereby granted to the author(s) of this abstract to reproduce and distribute it freely, for noncommercial purposes. Permission is hereby granted to any individual scientist to download a single copy of this electronic file and reproduce up to 20 paper copies for noncommercial purposes advancing science and education, including classroom use, providing all reproductions include the complete content shown here, including the author information. All other forms of reproduction and/or transmittal are prohibited without written permission from GSA Copyright Permissions.