T45 Using Geologic Context to Improve Hydrogeologic Characterizations (Posters)

Sunday, 22 September 2024
8:00 AM - 5:30 PM
Hall D

INVESTIGATING HETEROGENEITY OF HYDRAULIC CONDUCTIVITY AND ITS INFLUENCE ON GROUNDWATER DYNAMICS WITHIN A SATURATED RIPARIAN BUFFER IN CENTRAL ILLINOIS

Paper number: T45-5
Program: Technical Sessions
Time: 8:00 AM – 5:30 PM

Authors

Abstract

The use of Saturated Riparian Buffers (SRBs) in agricultural settings as a means of reducing contamination of surface and groundwater resources has gained popularity due to their trapping ability and solute removal (nutrient recycling) capacity. In light of SRB’s nutrient-trapping and removal ability, numerous studies have been conducted to characterize the effectiveness of SRBs. However, most studies on SRBs have paid minimal attention to how heterogeneity of hydraulic conductivity (K) contributes to the effectiveness of SRBs. Heterogeneity of K has been proven to be, if not the most significant, one of the contributing factors to the effectiveness of SRBs since heterogeneity in K controls water fluxes and solute trapping efficiency. This study investigates the heterogeneity in horizontal K and estimates the vertical groundwater specific discharge (qv) between the upper weathered and its underlying unweathered glacial units of an SRB, adjacent to a tile-drained agricultural farm field in central Illinois. The glacial deposits at the study area are of the Tiskilwa Formation and are distinguished into an upper weathered clay, which becomes coarser and poorly sorted with depth, and an underlying unweathered diamicton. The diamicton comprises a clay dominated matrix with coarser sediment resulting in poorly sorted sediments. For 23 wells, geometric mean K values were calculated after reducing multiple slug test results using the Hvorslev (1951) method. From the preliminary analysis, mean K values from individual wells ranged from 1.92 x 10-4 m/s to 7.63 x 10-6 m/s within the weathered diamicton; whereas, the unweathered diamicton had K values as low as 4.79 x 10-9 m/s. qv was computed as the product of the average vertical hydraulic conductivity (KV) and vertical hydraulic gradients (iz) between depths of 1.5 and 4.6m as these depths represent locations in the weathered and unweathered diamicton, respectively. KV values used were inferred from the horizontal K reduced from the slug test but as an order of magnitude lower. Typical iz values ranged from 0.03 to 0.1 from one-time measurements. Groundwater flow direction was downwards except in a few areas where groundwater flowed up. The qv ranged from 1.25 x 10-5 m/s to 4.30 x 10-7 m/s where areas with high K had higher qv. In conclusion, the study area exhibits heterogeneity, depicted by the variation of K over orders of magnitude.

Geological Society of America Abstracts with Programs. Vol. 56, No. 5

doi: 10.1130/abs/2024AM-404792

© Copyright 2024 The Geological Society of America (GSA), all rights reserved. Permission is hereby granted to the author(s) of this abstract to reproduce and distribute it freely, for noncommercial purposes. Permission is hereby granted to any individual scientist to download a single copy of this electronic file and reproduce up to 20 paper copies for noncommercial purposes advancing science and education, including classroom use, providing all reproductions include the complete content shown here, including the author information. All other forms of reproduction and/or transmittal are prohibited without written permission from GSA Copyright Permissions.